Material & Process: air-texturized fiberglass yarn woven into fabric, then coated with special glue into wallcovering.

Application: It’s suitable for different occasions for inner wall decoration, such as hospital, school, hotel, residence, etc. It’s becoming more and more popular substitute for traditional decoration material due to its more incomparable advantages than normal PVC wallpaper and paint.

Properties:

l Good air permeability can prevent wall from moisture or mould;

l High tensile strength of fiberglass can protect wall well by external force;

l Breathable wallcovering can avoid bacteria.

l No toxic components, environment friendly;

l Variety of textures and beautiful looking;

l Fire retardant function after combination with adhesive and paint.

l Plain Series

l Twill Series

l Ceiling Series

l Jaquard Series

l Prepaint Series

l Foamed Series

Regular size and packing:

1m*25m; 1m*50m

1 roll/bag, shrink package each roll with both protection ends; big carton + pallet

One 20’C can load around 25000m2 to 50000 m2 depends on different items.

Construction Method:

1.Fill up wall’s holes or breaks with filler and sand wall to make  it smooth;

2. Brush adhesive on wall, brushing area a little wider than wallcovering width every time, around 1.1m widht;

3.Hang wallcovering onto wall and make sure the good joints of both neighbored edges;

4. Scrape and press wallcovering on wall at same direction to remove bubble

5. Cut  off access of wallcovering

6 Paint on wallcovering after adhesive is completely dried (around 24 hrs);  normally twice paint is required.